IAI RCP2 Series User Manual

105
Code Error name Cause/Action
FB FPGA error The FPGA (gate array) of the absolute-specification controller is not
operating properly.
Cause: (1) Malfunction due to the effect of noise, etc.
(2) Faulty FPGA
(3) Defective board installation inside the controller
Action: Reconnect the power.
If the error persists, investigate possible noise sources.
If the cause cannot be specified, please contact IAI.

IAI RCP2 Series Specifications

General

Control Output	Pulse Train
Power Supply Voltage	24 V DC
Storage Temperature	-10 to 60°C
Type	Controller
Control Method	Position Control
Communication Interface	RS-232C
Humidity	85% RH (non-condensing)