Fieldbus Communication
RCP6
Table of Overall Contents
Chapter 1 Specifications Check of Controller
In this chapter, explains the specifications, power capacity, model
codes, etc.
Chapter 6 Power-Saving Function
In this chapter, explains the feature to reduce the power consumption.
Chapter 7 Absolute Reset
In this chapter, explains the procedures for absolute reset.
Chapter 8 Parameter
In this chapter, explains how to set up or fine-tune the controller
settings.
Chapter 9 Troubleshooting
In this chapter, explains how to act in errors and contents of them.
Name for Each Parts and Their Functions
In this chapter, explains the name for each parts and their functions.
Chapter 5 Collision Detection Feature
In this chapter, explains the setup and tuning for collision
detection feature.
Chapter 2 Wiring
In this chapter, explains the basic wiring and connection to extension
devices such as the gateway unit.
43
175
181
185
227
12
21
173
Chapter 10 Appendix
In this chapter, explains the Safety Category, plus grounding and
maintenance.
249
Chapter 4 Vibration Suppress Control Function
In this chapter, explains about the vibration suppress control function
to reduce vibration caused by the actuator.
167
Chapter 11 Warranty
In this chapter, explains about the warranty.
269
Chapter 3 Operation
In this chapter, explains the comparison of operation patterns and
details of each operation such as positioning and pressing operations.
75
To Next Page
Loading...
Need help?
General
