012
DID THE TESTS FIND A DEVICE ERROR?
A device error is displayed with an X over the device.
The device ID (XXX), an error description code (YY),
and FRU code (ZZZZ) are displayed.
For example:
Note: If the test stops or hangs when the test is running,
replace the last device that was tested.
Yes No
013
The error was not detected by the test:
Check that the cables and connectors are not
damaged.
Reconnect all adapters, drives, and modules,
then test the computer several times. An All
Loop option is available for looping all the
tests. To exit from the looping, select the test
icon on the right, bottom corner of the screen at
the time of between each test.
If no error is detected, go to “Symptom-to-FRU
Index” on page 296 and use the user reported
symptom.
If any errors are detected, go to “FRU Codes”
on page 298.
014
– Note the error codes shown on the screen and go to
“FRU Codes” on page 298 and replace the appropriate
FRU.
XXX YY ZZZZ
XXX: Device ID
YY: Error Description Code
ZZZZ: FRU Code
ThinkPad 710T (2523) 289