IBM N51 Series User Manual

(CONTINUED)
004 (continued)
Go to Step 007.
005
DID THE POWER-GOOD LIGHT FOR ALL OF THE
EXTERNAL DEVICES COME ON?
Yes No
006
See the failing external device manual.
007
DID YOU RECEIVE A POST ERROR CODE?
Yes No
008
Go to Step 016 on page 325.
009
IS THE FIRST POST ERROR CODE WITHIN THE
RANGE OF 02080000 190I TO 02470000 190I?
IMPORTANT: If your error code is not in the range or
if it is not followed by a 190I, answer NO .
Yes No
010
Go to Step 016 on page 325.
011
– Restart the system program from:
 The system partition on the hard disk of the
computer.
 The Reference Diskette or the backup copy of the
system partition.
– Ensure that the Enable and Disable settings are
correct. If you receive a warning on the screen
concerning the “Keep” and “Remove” setting, follow the
instructions on the screen before continuing.
DID YOU HAVE TO CORRECT ANY OF THE ENABLE
AND DISABLE SETTINGS?
Yes No
012
Go to “Symptom-to-FRU Index” on page 329.
Before replacing any SCSI device, check that there
are no duplicate SCSI ID settings.
013
(Step 013 continues)
324 IBM Mobile Systems HMM - Volume 1

IBM N51 Series Specifications

General

Brand	IBM
Model	N51 Series
Category	Laptop
Language	English