IBM N51 Series

SCSI Subsystem Diagnostics Utility V1.0
Enter F3=Exit
SCSI Devices Test Menu
(ID0)
(ID1)
(ID2)
(ID3)
(ID4)
(ID5)
(ID6)
(ID7)
Select one
1.All
2. (device name)
3. (device name)
4. N (device name)
5. (device name)
6. (device name)
7. (device name)
8. (device name)
9. (device name)
0.Exit
Insert a scratch TAPE in the drive.
6. Insert the requested media and wait for approximately
30 seconds until the media is loaded.
7. Press any key. If no SCSI devices are found, a
pop-up menu appears.
SCSI Subsystem Diagnostics Utility V1.0
Enter F3=Exit
SCSI Devices Test Menu
(ID0)
(ID1)
(ID2)
(ID3)
(ID4)
(ID5)
(ID6)
(ID7)
Select one
1.All
2. (device name)
3. (device name)
4. N (device name)
5. (device name)
6. (device name)
7. (device name)
8. (device name)
9. (device name)
0.Exit
No Device Present
8. The test begins and the following pop-up menu
appears.
SCSI Subsystem Diagnostics Utility V1.0
Enter F3=Exit
SCSI Devices Test Menu
(ID0)
(ID1)
(ID2)
(ID3)
(ID4)
(ID5)
(ID6)
(ID7)
Select one
1.All
2. (device name)
3. (device name)
4. N (device name)
5. (device name)
6. (device name)
7. (device name)
8. (device name)
9. (device name)
0.Exit
IDn: Test in Process
device name
9. If the test is successful, the following appears.
414 IBM Mobile Systems HMM - Volume 1