IBM N51 Series User Manual

3. If the initialization ends successfully, the following
screen appears. Select an item.
Select one
1. Run the tests one time
2. Run the tests continuously
SCSI Subsystem Diagnostics Utility V1.0
Enter F3=Exit
4. The SCSI Devices Test Menu appears. Select one
of the devices.
SCSI Subsystem Diagnostics Utility V1.0
Enter F3=Exit
SCSI Devices Test Menu
(ID0)
(ID1)
(ID2)
(ID3)
(ID4)
(ID5)
(ID6)
(ID7)
Select one
1.All
2. (device name)
3. (device name)
4. (device name)
5. (device name)
6. (device name)
7. (device name)
8. (device name)
9. (device name)
0.Exit
The device name may be any of the following:
 SCSI Hard Disk
 SCSI Tape Drive
 SCSI CD-ROM
 SCSI Optical Drive
 or No Device
The SCSI controller of Dock II appears as ID7 on the
screen.
5. If a SCSI device exists and a test media is required to
test the SCSI device, the following pop-up menu
appears (shows the case of a SCSI tape drive).
Dock II (3546)
413

IBM N51 Series Specifications

General

Brand	IBM
Model	N51 Series
Category	Laptop
Language	English