EasyManua.ls Logo

IBM pSeries 630 6C4 - Page 255

IBM pSeries 630 6C4
651 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 4. Firmware Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
20FC 0021 Failed to retrieve power, packaging, and/or
cooling VPD via SPCN for the corresponding
subsystem.
Service processor mailbox failed to get power,
packaging, and cooling device VPD.
1. Check the RIO cabling.
2. Check for system firmware updates.
3. Replace the RIO riser card (location:
U0.dd-P1.1) in the I/O subsystem that the
RIO cable in step 1 is attached to.
4. Replace the I/O backplane that the RIO
cable in step 1 is attached to.
5. Replace the CEC backplane, U0.1-P1.
20FC 0030 Corrupted power, packaging, and cooling
device VPD format in the SPCN configuration
table.
1. Check for system firmware updates.
2. Replace the part specified by the location
code.
3. Replace the RIO riser card (location:
U0.dd-P1.1) in the I/O subsystem that the
RIO cable in step 1 is attached to.
4. Replace the I/O backplane that the RIO
cable in step 1 is attached to.
5. Replace the CEC backplane, U0.1-P1.
20FF 0001 Problem with VPD
1. Replace the part indicated by the location
code.
2. If no location code is specified, call service
support.
20FF0010 Invalid VPD (defect ROM structure for PCI)
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
20FF0020 Invalid VPD (checksum mismatch)
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
20FF0021 Invalid VPD (ID tag length is more than 256
bytes)
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
20FF0022 Invalid VPD (84/90 tag length is more than 2KB
- large resource tag)
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
20FF0023 Invalid VPD (buffer length is more than 2KB
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
Chapter 5. Error Code to FRU Index 235

Table of Contents

Other manuals for IBM pSeries 630 6C4

Related product manuals