If this option is chosen, the menu similar to the following is displayed:
Remote I/O (RIO) Link Speed Set Up Menu
Hardware Capability (internal and external): 1000 Mbps
1. Maximum RIO speed setting (internal and external):
Currently Uninitialized
98. Return to previous menu.
0>1
If option 1 is selected, the RIO interface speed can be set as shown below:
Enter new value for this option: (1 = 1000 MBPS, 2 = 500 Mbps) 0>
This setting will remain in effect until it is changed or NVRAM is cleared.
Language Selection Menu
The service processor menus and messages are available in various languages. This menu allows
selecting languages in which the service processor and system firmware menus and messages are
displayed.
LANGUAGE SELECTION MENU
1. English
2. Francais
3. Deutsch
4. Italiano
5. Espanol
98. Return to Previous Menu
99. Exit from Menus
0>
Note: Your virtual terminal window must support the ISO-8859 character set to correctly display
languages other than English.
Chapter 7. Using the Service Processor 385
To Next Page
Loading...
Need help?
General