Select Boot Options
Use this menu to view and set various options regarding the installation devices and boot devices.
1. Select Install or Boot a Device
2. Select Boot Devices
3. Multiboot Startup
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Select Install or Boot a Device
Allows you to select a device from which to boot or install the operating system. This option is for
the current boot only.
Select Boot Devices
Allows you to set the boot list.
Multiboot Startup
Toggles the multiboot startup flag, which controls whether the multiboot menu is invoked
automatically on startup.
If Select Install or Boot a Device is selected, the following menu displays:
Select Device Type
1. Diskette
2. Tape
3. CD/DVD
4. IDE
5. Hard Drive
6. Network
7. None
8. List All Devices
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
If a device is selected that is not in the system, a menu with the following message displays:
.---------------------------------------------------------.
| THE SELECTED DEVICES WERE NOT DETECTED IN THE SYSTEM ! |
| Press any key to continue. |
`---------------------------------------------------------’
414 Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide
To Next Page
Loading...
