Table 5. Service Processor Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
4B26 26F7 2-way processor card fault Replace the processor card specified by the
location code.
4B26 26F8 1-way processor card fault Replace the processor card specified by the
location code.
4B26 26FA 2-way processor card fault Replace the processor card specified by the
location code.
4B26 26FB 2-way processor card fault Replace the processor card specified by the
location code.
4B26 26FD 1-way processor card fault Replace the processor card specified by the
location code.
4B26 26FE 2-way processor card fault Replace the processor card specified by the
location code.
4B26 26FF 1-way processor card fault Replace the processor card specified by the
location code.
4B27 26F6 1-way processor card fault Replace the processor card specified by the
location code.
4B27 26F7 2-way processor card fault Replace the processor card specified by the
location code.
4B27 26F8 1-way processor card fault Replace the processor card specified by the
location code.
4B27 26FA 2-way processor card fault Replace the processor card specified by the
location code.
4B27 26FB Description: 2-way processor card fault
Action:
1. If the system has one 2-way processor card or two 2-way processor cards, look at word 13 in
the service processor error log entry detail data. If word 13 is not 7xxxD023 or 7xxxD0E1,
replace the processor card specified by the location code. If word 13 is 7xxxD023 or 7xxxD0E1,
look for an earlier entry in the service processor error log of the form 4067xxxx, 4507xxxx,
4607xxxx, or 4B2726FB that has not already been corrected by a parts replacement. If you find
an earlier entry, replace the FRU identified by that error, not the latest occurrence of 4B2726FB.
2. If this does not resolve the problem, call service support.
4B27 26FD 1-way processor card fault Replace the processor card specified by the
location code.
4B27 26FE 2-way processor card fault Replace the processor card specified by the
location code.
4B27 26FF 1-way processor card fault Replace the processor card specified by the
location code.
4B28 26F6 1-way processor card fault Replace the processor card specified by the
location code.
4B28 26F7 2-way processor card fault Replace the processor card specified by the
location code.
4B28 26F8 1-way processor card fault Replace the processor card specified by the
location code.
4B28 26FA 2-way processor card fault Replace the processor card specified by the
location code.
4B28 26FB 2-way processor card fault Replace the processor card specified by the
location code.
Chapter 5. Error Code to FRU Index 331
To Next Page
Loading...
