2. On the AIX command line, type lsslot -c pci |pg
This list relates the AIX logical name of all resources to location code. Look for the AIX logical name
that you recorded in the first step and read the location code of the resource. You can then determine
the physical location of the resource by flashing the FRU identify LED (see “FRU Identify LEDs” on
page 27) that corresponds to the location code.
FRU Name Physical Location Code AIX Location Code
Model D20 I/O Drawer U0.dd (dd = any number from 2 through 63)
First I/O Subsystem Location Codes
Rack frame U0
I/O drawer backplane U0.dd-P1
I/O subsystem drawer U0.dd
RIO Bus Adapter
RIO bus adapter U0.dd-P1.1
RIO port 1 upper connector U0.dd-P1.1/Q1
RIO port 1 cable U0.dd-P1.1/Q1#
RIO port 0 lower connector U0.dd-P1.1/Q2
RIO port 0 cable U0.dd-P1.1/Q2#
PCI Bus Controller
PCI bus controller PHB0 U0.dd-P1
PCI to PCI bridge EADS-X U0.dd-P1 1r-10, 1r-12, 1r-16
PCI Bus Controller PHB2
PCI bus controller PHB2 U0.dd-P1
PCI to PCI bridge (EADS_X) U0.dd-P1 2Q-10, 2Q-12, 2Q-14, 2Q-16
Pluggable Adapter Slots
PCI slot 1 U0.dd-P1/I1
PCI card in slot 1 U0.dd-P1-I1 2R-08
PCI slot 2 U0.dd-P1/I2
PCI card in slot 2 U0.dd-P1-I2 2U-08
PCI slot 3 U0.dd-P1/I3
PCI card in slot 3 U0.dd-P1-I3 2a-08
PCI slot 4 U0.dd-P1/I4
PCI card in slot 4 U0.dd-P1-I4 2d-08
PCI slot 5 U0.dd-P1/I5
PCI card in slot 5 U0.dd-P1/I5 1s-08
PCI slot 6 U0.dd-P1/I6
PCI card in slot 6 U0.dd-P1/I6 1v-08
PCI slot 7 U0.dd-P1/I7
PCI card in slot 7 U0.dd-P1/I7 25–08
Power Supply
Power supply 1 (no internal blower) U0.dd-V1
Power supply 2 (no internal blower) U0.dd-V2
Cooling Blowers
Chapter 1. Reference Information 35
To Next Page
Loading...
Need help?
General