EasyManuals Logo

IBM pSeries 630 6C4 User Manual

IBM pSeries 630 6C4
651 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #555 background imageLoading...
Page #555 background image
Service
Request
Number
Description and Action
A11-08x Description: A non-critical error has been detected, a system bus protocol/transfer error.
Action: Schedule deferred maintenance. Use “MAP 1230: Linux Platform Error Problem
Resolution” on page 80.
A11-50x Description: Recoverable errors on resource indicate a trend toward an unrecoverable error.
However, the resource could not be deconfigured and is still in use. The system is operating
with the potential for an unrecoverable error. Action: If repair is not immediately available,
reboot and the resource will be deconfigured. Then operations can continue in a degraded
mode. To repair use “MAP 1230: Linux Platform Error Problem Resolution” on page 80.
A11-510 Description: Resource has been deconfigured and is no longer in use due to a trend toward
an unrecoverable error. Action: The system is operating in a degraded mode. Schedule
maintenance. To repair use “MAP 1230: Linux Platform Error Problem Resolution” on
page 80.
A11-520 Description: Recoverable errors on resource indicate a trend toward an unrecoverable error.
However, the resource could not be deconfigured and is still in use. The system is operating
with the potential for an unrecoverable error. Action: Try removing the processes from the
failing processor and retry the deconfiguration, use the ha_star -C command. An alternative
is reboot, and the processor will be deconfigured. Then the system can continue in a
degraded mode. To repair use “MAP 1230: Linux Platform Error Problem Resolution” on
page 80.
A11-530 Description: Recoverable errors on resource indicate a trend toward an unrecoverable error.
However, the resource could not be deconfigured and is still in use. The system is operating
with the potential for an unrecoverable error. Run-time processor deconfiguration can be
enabled to deconfigure the processor. Action: To enable run-time processor deconfiguration,
use the chdev -a cpuguard=enable -l sys0 command. Then to retry the deconfiguration,
use the ha_star -C command. An alternative is reboot, and the processor will be
deconfigured. Then the system can continue in a degraded mode. To repair use “MAP 1230:
Linux Platform Error Problem Resolution” on page 80.
A11-540 Description: Recoverable errors on resource indicate a trend toward an unrecoverable error.
However, the resource could not be deconfigured and is still in use. The system is operating
with the potential for an unrecoverable error. Action: If repair is not immediately available,
reboot and the resource will be deconfigured. Then operations can continue in a degraded
mode. To repair use “MAP 1230: Linux Platform Error Problem Resolution” on page 80.
A11-550 Description: Recoverable errors on resource indicate a trend toward an unrecoverable error.
However, the resource could not be deconfigured and is still in use. The system is operating
with the potential for an unrecoverable error. Action: If repair is not immediately available,
reboot and the resource will be deconfigured. Then operations can continue in a degraded
mode. To repair use “MAP 1230: Linux Platform Error Problem Resolution” on page 80.
A11-560 Description: Recoverable errors on a resource indicate a potential for unrecoverable errors.
The resource cannot be deconfigured and is still in use. The problem may be corrected by
array bit steering. Use “MAP 1235: System Array Self-Repair Problem Resolution for Linux”
on page 85.
A11-570 Description: A processor has been deconfigured due to a trend toward an unrecoverable
error. The system is operating in a degraded mode. The problem may be corrected by array
bit steering. Use “MAP 1235: System Array Self-Repair Problem Resolution for Linux” on
page 85.
A11-580 Description: Recoverable errors on a processor indicate a potential for an unrecoverable
error. The resource cannot be deconfigured and is still in use. The problem may be
corrected by array bit steering. Use “MAP 1235: System Array Self-Repair Problem
Resolution for Linux” on page 85.
Chapter 11. SRNs for Linux 535

Table of Contents

Other manuals for IBM pSeries 630 6C4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM pSeries 630 6C4 and is the answer not in the manual?

IBM pSeries 630 6C4 Specifications

General IconGeneral
BrandIBM
ModelpSeries 630 6C4
CategoryServer
LanguageEnglish

Related product manuals