Symptom Starting Point
You have a problem that does not prevent the system
from booting and the media subsystem operator panel is
functional.
Go to the Fast Path MAP in the RS/6000 Eserver
pSeries Diagnostic Information for Multiple Bus Systems.
You do not have a symptom. Go to MAP 0020 in the RS/6000 Eserver pSeries
Diagnostic Information for Multiple Bus Systems.
You have an SRN, from a partition running Linux, that is
one of the following: 651-88x, 651-89x, 652-88x, 652-89x,
Axx-xxx, or Axx-xxxx.
Go to Chapter 11, “SRNs for Linux”, on page 529 and
perform the actions listed there.
You have an SRN, from a partition running Linux, that is
not one of the following: 651-88x, 651-89x, 652-88x,
652-89x, Axx-xxx, or Axx-xxxx.
Go to the Fast Path MAP in the RS/6000 Eserver
pSeries Diagnostic Information for Multiple Bus Systems.
You have an SRN from a partition running AIX or AIX
standalone diagnostics
Go to the Fast Path MAP in the RS/6000 Eserver
pSeries Diagnostic Information for Multiple Bus Systems.
The system stops and a 3-digit number is displayed in the
operator panel display.
Record SRN 101-xxx, where xxx is the 3-digit number
displayed in the operator panel display, then go to the
Fast Path MAP in the RS/6000 Eserver pSeries
Diagnostic Information for Multiple Bus Systems.
The system stops and a 4-digit number beginning with 0
or 2 is displayed in the operator panel display.
Go to the Fast Path MAP in the RS/6000 Eserver
pSeries Diagnostic Information for Multiple Bus Systems.
All other symptoms. Go to “Quick Entry MAP” on page 63.
62 Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide
To Next Page
Loading...
Need help?
General