IBM Storwize V5020 User Manual

122 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
Click Consistency Group to open the window that is shown in Figure 3-70. FlashCopy
relationships can be placed into a consistency group. You can also use start and stop
commands against the FlashCopy consistency group from this window by right-clicking the
relationship.
Figure 3-70 FlashCopy Consistency Groups window
When any FlashCopy consistency group is available, either empty or with existing
relationships, you can move an existing relationship to that group. Right-click a relationship
and select Move to Consistency Group as shown in Figure 3-71.
Other actions on the same menu include Remove from Consistency Group, Start (resume)
or Stop that FlashCopy operation, Rename Mapping (rename a target volume or FlashCopy
mapping), and Delete Mapping.
Figure 3-71 Moving a relationship to the consistency group

IBM Storwize V5020 Specifications

General

Brand	IBM
Model	Storwize V5020
Category	Storage
Language	English