416 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
4. Click Finish to start the migration. After the task is complete, check the results and click
Close to return to the Volumes panel.
For more information about importing volumes from external storage, see Chapter 7, “Storage
migration” on page 349 and Chapter 4, “Storage pools” on page 143.
8.3.10 Deleting a volume
To delete a volume, complete the following steps:
1. Select Delete from the Actions menu.
2. Confirm the number of volumes and select the check box if you want to force the deletion.
Figure 8-53 shows the Delete Volume panel.
Figure 8-53 Delete Volume panel
3. Click Delete to remove the selected volume or volumes from the system. After the task
completes, click Close to return to the Volumes panel.
Important: Use image mode to import or export existing data into or out of the IBM
Storwize V5000. Migrate data from image mode MDisks to other storage pools to benefit
from storage virtualization.
Important: You must force the deletion if the volume has host mappings or if the volume is
used in FlashCopy mappings. To be cautious, always ensure that the volume has no
association before you delete it.
To Next Page
Loading...
Need help?
General