Chapter 13. Encryption 799
13.11 Disabling encryption
You are prevented from disabling encryption if there are any encrypted objects defined apart
from self-encrypting MDisks. You can disable encryption in the same way whether you use
USB flash drives, key server or both providers.
To disable encryption, follow these steps:
1. Click Settings → Security → Encryption and click Enabled. If no encrypted objects
exist, then a drop-down menu is displayed. Click Disabled to disable encryption on the
system. Figure 13-83 shows an example for a system with both encryption key providers
configured.
Figure 13-83 Disabling encryption on a system with both providers
2. You receive a message confirming encryption has been disabled. Figure 13-84 shows the
message when using a key server.
Figure 13-84 Encryption disabled
To Next Page
Loading...
Need help?
General