Chapter 8. Advanced host and volume administration 383
3. Click Modify Volume Mapping. A window with a list of volumes currently mapped to the
selected host will be shown, as in Figure 8-12.
Figure 8-12 List of volumes mapped to the host
4. Select the volume that you want to unmap and then click Remove Volume Mappings as
shown in Figure 8-13.
Figure 8-13 Selecting the volume to be unmapped
Note: To unmap multiple volumes click and hold the shift key and then select each
consecutive volume in the window. If the multiple volumes you want to unmap are not
consecutive, then click the Ctrl key and then select each volume as desired.
To Next Page
Loading...
Need help?
General