768 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
5. If you want to add additional, secondary SKLM servers, then click “+” and fill the data for
secondary SKLM servers, as shown on Figure 13-32. You can define up to four SKLM
servers. Click Next when you are done.
Figure 13-32 Configuring multiple SKLM servers
6. The next page in the wizard is a reminder that SPECTRUM_VIRT device group dedicated for
IBM Spectrum Virtualize systems must exist on the SKLM key servers. Make sure that this
device group exists and click Next to continue, as shown in Figure 13-33.
Figure 13-33 Checking key server device group
To Next Page
Loading...
Need help?
General