774 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
3. The wizard moves to the Key Servers tab, as shown in Figure 13-42. Enter the name and
IP address of the key servers. Note that the first key server specified must be the primary
SKLM key server.
Figure 13-41 Configuration of the primary SKLM server
4. If you want to add additional, secondary SKLM servers, then click the Plus sign (+) and fill
the data for subsequent SKLM servers, as shown in Figure 13-42 on page 775. You can
define up to four SKLM servers. Click Next when you are done.
Note: The supported versions of IBM Security Key Lifecycle Manager (up to V2.7,
which was the latest code version when this book was written) differentiate between
primary and secondary key server role. Primary SKLM server as defined on Key
Servers screen of Enable Encryption wizard must be the server defined as primary by
SKLM administrators.
To Next Page
Loading...
Need help?
General