I.11002 [I.11002] A processor mismatch has been detected between one or more processors in the system.
Explanation: One or More Mismatched Processors Detected
Severity: Error
User response: Complete the following steps:
1. This message could occur with messages about other Processor configuration problems. Resolve those messages
first.
2. If the problem persists, ensure that matching processors are installed (i.e., matching option part numbers, etc)
3. Verify that the Processor’s are installed in the correct sockets according to the service information for this
product. If not, correct that problem.
4. Check IBM support site for an applicable service bulletin or firmware update that applies to this Processor error.
5. (Trained Service technician only) Replace mismatching processor. Inspect Processor socket and replace the system
board first if socket is damaged.
I.18005 [I.18005] A discrepancy has been detected in the number of cores reported by one or more processor
packages within the system.
Explanation: Processors have mismatched number of cores
Severity: Error
User response: Complete the following steps:
1. If this is a newly installed option, ensure that matching Processors are installed in the correct Processor sockets
according to the service information for this product.
2. Check IBM support site for an applicable service bulletin that applies to this Processor error.
3. (Trained Service technician only) Replace Processor. Inspect Processor socket and replace the system board first if
socket is damaged.
I.18006 [I.18006] A mismatch between the maximum allowed QPI link speed has been detected for one or
more processor packages.
Explanation: Processors have mismatched QPI Speed
Severity: Error
User response: Complete the following steps:
1. If this is a newly installed option, ensure that matching Processor CPUs are installed in the correct ProcessorCPU
sockets according to the service information for this product
2. Check IBM support site for an applicable retain tipservice bulletin or firmware update that applies to this
Processor error.
3. (Trained Service technician only) Replace Processor. Inspect Processor socket and replace the system board first if
socket is damaged.
I.11002 • I.18006
592
System x3650 M4 BD Type 5466: Installation and Service Guide
To Next Page
Loading...
Need help?
General
