IBM System x3650 M4 Type 7915 Problem Determination And Service Guide

Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
40000010-00000000 Security: Userid: '%1'
had %2 login failures
from WEB client at IP
address %3.
(%1 = user ID; %2 =
MaximumSuccessive
LoginFailures
(currently set to 5 in
the firmware); %3 =
IP address,
xxx.xxx.xxx.xxx)
Error A user has
exceeded the
maximum number
of unsuccessful
login attempts from
a web browser and
has been
prevented from
logging in for the
lockout period.
1. Make sure that the correct login ID
and password are being used.
2. Have the system administrator
reset the login ID or password.
40000011-00000000 Security: Login ID:
'%1' had %2 login
failures from CLI at
%3.
(%1 = user ID; %2 =
MaximumSuccessive
LoginFailures
(currently set to 5 in
the firmware); %3 =
IP address,
xxx.xxx.xxx.xxx)
Error A user has
exceeded the
maximum number
of unsuccessful
login attempts from
the command-line
interface and has
been prevented
from logging in for
the lockout period.
1. Make sure that the correct login ID
and password are being used.
2. Have the system administrator
reset the login ID or password.
40000012-00000000 Remote access
attempt failed. Invalid
userid or password
received. Userid is
'%1' from WEB
browser at IP address
%2.
(%1 = user ID; %2 =
IP address,
xxx.xxx.xxx.xxx)
Error A user has
attempted to log in
from a web
browser by using
an invalid login ID
or password.
1. Make sure that the correct login ID
and password are being used.
2. Have the system administrator
reset the login ID or password.
40000013-00000000 Remote access
attempt failed. Invalid
userid or password
received. Userid is
'%1' from TELNET
client at IP address
%2.
(%1 = user ID; %2 =
IP address,
xxx.xxx.xxx.xxx)
Error A user has
attempted to log in
from a Telnet
session by using
an invalid login ID
or password.
1. Make sure that the correct login ID
and password are being used.
2. Have the system administrator
reset the login ID or password.
40000014-00000000 The Chassis Event
Log (CEL) on system
%1 cleared by user
%2.
(%1 =
CIM_ComputerSystem.
ElementName; %2 =
user ID)
Info A user has cleared
the IMM event log.
No action; information only.
96 IBM System x3650 M4 Type 7915: Problem Determination and Service Guide

IBM System x3650 M4 Type 7915 Specifications

General

Form Factor	2U Rack
Chipset	Intel C600 series chipset
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware vSphere
Processor	Up to two Intel Xeon E5-2600 series processors
Memory	Up to 768GB DDR3 (24 DIMM slots)
Storage	Up to 16 x 2.5" or 6 x 3.5" SAS/SATA HDDs or SSDs
RAID Support	RAID 0, 1, 10
Network	Four integrated Gigabit Ethernet ports
Power Supply	Up to two redundant hot-swap 550 W, 750 W, or 900 W power supplies
Expansion Slots	Up to 7 PCIe 3.0 slots
Storage Controller	ServeRAID M5110e
Management	Integrated Management Module (IMM) v2