Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
40000015-00000000 IMM reset was
initiated by user %1.
(%1 = user ID)
Info A user has initiated
a reset of the IMM.
No action; information only.
40000016-00000000 ENET[0]
DHCP-HSTN=%1,
DN=%2, IP@=%3,
SN=%4, GW@=%5,
DNS1@=%6.
(%1 =
CIM_DNSProtocol
Endpoint.Hostname;
%2 =
CIM_DNSProtocol
Endpoint.DomainName;
%3 =
CIM_IPProtocolEndpoint.
IPv4Address; %4 =
CIM_IPProtocolEndpoint.
SubnetMask; %5 = IP
address,
xxx.xxx.xxx.xxx;%6=
IP address,
xxx.xxx.xxx.xxx)
Info The DHCP server
has assigned an
IMM IP address
and configuration.
No action; information only.
40000017-00000000 ENET[0]
IP-Cfg:HstName=%1,
IP@%2, NetMsk=%3,
GW@=%4.
(%1 =
CIM_DNSProtocol
Endpoint.Hostname;
%2 =
CIM_StaticIPSettingData.
IPv4Address; %3 =
CIM_StaticIPSettingData.
SubnetMask; %4 =
CIM_StaticIPSettingData.
DefaultGatewayAddress)
Info An IMM IP address
and configuration
have been
assigned using
client data.
No action; information only.
40000018-00000000 LAN: Ethernet[0]
interface is no longer
active.
Info The IMM Ethernet
interface has been
disabled.
No action; information only.
40000019-00000000 LAN: Ethernet[0]
interface is now
active.
Info The IMM Ethernet
interface has been
enabled.
No action; information only.
4000001a-00000000 DHCP setting
changed to by user
%1.
(%1 = user ID)
Info A user has
changed the DHCP
mode.
No action; information only.
Chapter 3. Diagnostics 97
To Next Page
Loading...
