Cmd.
Sub
cmd.
Data Description
1A 05 0131 01 M1 selection for count up trigger channel
02 M2 selection for count up trigger channel
03 M3 selection for count up trigger channel
04 M4 selection for count up trigger channel
0132 0001 to
9999
Send/read present number
(0001=1, 9999=9999)
0133 01 to 60 Send/read CW keyer repeat time
(01=1 second, 60=60 seconds)
0134 28 to 45 Send/read CW keyer dot/dash ratio
(28=1:1:2.8, 45=1:1:4.5)
0135 00 2 milliseconds selection for rise time of the
transmitted CW envelope
01 4 milliseconds selection for rise time of the
transmitted CW envelope
02 6 milliseconds selection for rise time of the
transmitted CW envelope
03 8 milliseconds selection for rise time of the
transmitted CW envelope
04 10 milliseconds selection for rise time of the
transmitted CW envelope
0136 00 Normal selection for paddle polarity
01 Reverse selection for paddle polarity
0137 00 Straight selection for keyer type
01 BUG-KEY selection for keyer type
02 ELEC-KEY selection for keyer type
0138 00 Mic. up/down keyer function OFF
01 Mic. up/down keyer function ON
0139 00 RTTY decoder FFT scope averaging function
OFF
01 Number 2 selection for RTTY decoder FFT
scope averaging function
02 Number 3 selection for RTTY decoder FFT
scope averaging function
03 Number 4 selection for RTTY decoder FFT
scope averaging function
0140 see p. 167 Set/read FFT scope waveform color set for
RTTY decoder
0141 00 RTTY decode USOS function OFF
01 RTTY decode USOS function ON
0142 00 “CR,LF,CR+LF” selection for RTTY decode
new line code
01 “CR+LF” selection for RTTY decode new line
code
0143 00 OFF selection for RTTY diddle
01 BLANK selection for RTTY diddle
02 LTRS selection for RTTY diddle
0144 00 RTTY encode USOS function OFF
01 RTTY encode USOS function ON
0145 00 RTTY auto CR+LF by keyboard’s [F12] OFF
01 RTTY auto CR+LF by keyboard’s [F12] ON
0146 00 RTTY time stamp OFF
01 RTTY time stamp ON
0147 00 Local time selection for RTTY time stamp
01 Clock2 selection for RTTY time stamp
0148 00 Frequency stamp for RTTY time stamp OFF
01 Frequency stamp for RTTY time stamp ON
0149 see p. 167 Send/read received text font color for RTTY
decoder
0150 see p. 167 Send/read transmitted text font color (RTTY)
0151 see p. 167 Send/read time stamp text font color (RTTY)
0152 see p. 167 Send/read text font color in TX buffer (RTTY)
0153 00 PSK decoder FFT scope averaging function
OFF
01 Number 2 selection for PSK decoder FFT
scope averaging function
02 Number 3 selection for PSK decoder FFT
scope averaging function
03 Number 4 selection for PSK decoder FFT
scope averaging function
0154 see p. 167 Set/read FFT scope waveform color set for
PSK decoder
0155 00 ±8 Hz selection for PSK AFC function tuning
range
01 ±15 Hz selection for PSK AFC function
tuning range
Cmd.
Sub
cmd.
Data Description
1A 05 0156 00 PSK time stamp OFF
01 PSK time stamp ON
0157 00 Local time selection for PSK time stamp
01 Clock2 selection for PSK time stamp
0158 00 Frequency stamp for PSK time stamp OFF
01 Frequency stamp for PSK time stamp ON
0159 see p. 167 Send/read received text font color for PSK
decoder
0160 see p. 167 Send/read transmitted text font color (PSK)
0161 see p. 167 Send/read time stamp text font color (PSK)
0162 see p. 167 Send/read text font color in TX buffer (PSK)
0163 00 LOW scan speed selection
01 HIGH scan speed selection
0164 00 Scan resume OFF
01 Scan resume ON
0165 0000 to
0255
Send/read VOX gain
(0000=0%, 0255=100%)
0166 0000 to
0255
Send/read ANTI-VOX gain
(0000=0%, 0255=100%)
0167 00 to 20 Send/read VOX delay time
(00=0.0 sec, 20=2.0 sec)
0168 00 VOX voice delay function OFF
01 Short selection for VOX voice delay
02 Mid selection for VOX voice delay
03 Long selection for VOX voice delay
0169 0000 to
0255
Send/read NB level
(0000=0%, 0255=100%)
0170 00 to 09 Send/read NB depth
(00=1, 09=10)
0171 0000 to
0255
Send/read NB width
(0000=1, 0255=100)
0172 0000 to
0255
Send/read MONITOR gain
(0000=0%, 0255=100%)
0173 00 to 05 Send/read time-out timer
( 00=OFF, 01=
3 min
, 02=
5 min
, 03=
10 min
,
04=
20 min
, 05=
30 min
)
0174 00 to 06
Send/read audio output level at APF ON
(00=0 dB, 06=+6 dB)
0175 00 to 05
Send/read the TX Delay setting (HF)
( 00=OFF, 01=10 ms, 02=15 ms, 03=20 ms,
04=25 ms, 05=30 ms)
0176 00 to 05
Send/read the TX Delay setting (50 M)
( 00=OFF, 01=10 ms, 02=15 ms, 03=20 ms,
04=25 ms, 05=30 ms)
0177 00 Send/read the Shutdown function is
Shutdown
01 Send/read the Shutdown function is
Standby/Shutdown
0178 00 Send/read command to disable to output the
antenna controller status (frequency and so
on) from [REMOTE].
01 Send/read command to enable to output the
antenna controller status (frequency and so
on) from [REMOTE].
0179 00 Send/read the spectrum display type is Fill
01 Send/read the spectrum display type is
Fill+Line
0180 see p. 167 Send/read spectrum line color
0181 00
Send/read waterfall set for spectrum scope OFF
01
Send/read waterfall set for spectrum scope ON
0182 00 to 06
Send/read peak color level set for waterfall of
the spectrum scope
( 00=Grid 1, 01=Grid 2, 02=Grid 3, 03=Grid 4,
04=Grid 5, 05=Grid 6, 06=Grid 7)
06 see p. 167 Send/read DATA mode with filter set
07 00 WIDE selection for SSB transmit bandwidth
01 MID selection for SSB transmit bandwidth
02 NAR selection for SSB transmit bandwidth
08 00 SHARP selection for DSP filter type
01 SOFT selection for DSP filter type
09 00 3 kHz roofing filter selection
01 6 kHz roofing filter selection
02 15 kHz roofing filter selection
0A 00 WIDE selection for manual notch width
01 MID selection for manual notch width
02 NAR selection for manual notch width
1B 00 see p. 168 Send/read repeater tone frequency
01 see p. 168 Send/read tone squelch frequency
164
12
CONTROL COMMAND
12
To Next Page
Loading...
