Icom IC-9700 - Entering a Memory Name; Clearing a Memory Channel

4-4
4. MEMORY OPERATION
Except for the blank channels, you can assign a name
to all memory channels, including scan edges.
The names will be displayed along with the frequency,
mode and lter number.
1. Display the MEMORY screen.
MENU
»
MEMORY
2. Rotate
MULTI
to select the channel to enter a
name. (Example: Memory channel 2)
3. T ouch of the selected channel.
4. Touch “Edit Name.”
L Touch “Memory Clear” to clear any memory contents
and name.
5. Enter a name, and then touch [ENT].
(Example: CQ)
L See “Keyboard entering and editing” in the BASIC
MANUAL for details.
6. To close the MEMORY screen, push
EXIT
.
Memory name
L The Memory name is not displayed when the
Mini scope screen (p. 5-2) or expanded screen is
displayed.
L You can also select not to display the Memory name
on the standby screen.
MENU
»
SET > Display > Memory Name
Entering a memory name Clearing a memory channel
You can clear a no-longer-used memory channel and
reset it as a blank channel, except for the program
channels (1A/1B ~ 3A/3B) and Call channels (C1 and
C2).
1. Push
V/M
to select the Memory mode.
2. Push
kHz
M-CH
.
3. Rotate
MULTI
to select the channel to clear.
(Example: Memory channel 2)
4. Touch the channel number.
5. Touch [M-CLR] for 1 second to clear the memory
channel.
6. To close the VFO/MEMORY screen, push
EXIT
.