Icom IC-9700 - D Manually Setting Your Position

8-2
8. GPS OPERATION (ADVANCED)
Before starting GPS operation
1. Setting the current position
1. Open the MANUAL POSITION screen.
MENU
» GPS > GPS Set > Manual Position
2. Touch for 1 second.
3. Touch “Edit.”
4. Touch “LATITUDE.”
5. Enter the latitude, and then touch [ENT].
6. Enter the longitude in the same way.
7. Touch “<<Write>>.”
8. Touch [ Yes].
9. To close the MANUAL POSITION screen, push
EXIT
several times.
D Manually setting your position
2. Setting GPS Select to Manual
1. Open the GPS Select screen.
MENU
» GPS > GPS Set > GPS Select
2. Touch “Manual.”
• The entered position in Manual Position is used for
the GPS function.
3. To close the GPS SET screen, push
EXIT
several
times.
TIP: You can capture position data from the GPS
receiver if you touch “Capture From GPS” in step 3.