Icom IC-9700 - About the MEMORY Screen; Memo Pad; D Saving the Contents into a Memo Pad; D Calling up the Memo Pads

4-5
4. MEMORY OPERATION
About the MEMORY screen Memo Pad
q w e r
y t
q Memory channel number
Displays the memory channel number.
L 1A/1B ~ 3A/3B, C1 and C2 cannot be left blank.
w Frequency
Displays the entered frequency.
e Operating mode
Displays the selected operating mode.
r Memory menu
Touch to display the MEMORY MENU.
L You can select between “Edit Name,” “Memory Write” and
“Memory Clear.”
t Memory name
Displays the memory name, if entered.
L See the previous page for details.
y Memory select icon (1 ~ 99)
Touch this icon to set the Select number “1,”
“2,” “3” or OFF. See page 5-5 for the Select
Memory scan.
L You can also touch the icon for 1 second to display
the SELECT ALL CLEAR screen, and then select the
desired item to reset the Select number.
L About the QUICK MENU
While selecting a memory channel with memory
contents, push QUICK to display the QUICK MENU,
where you can select “SELECT,” “Edit Name,”
“Memory Write,” “Memory Clear,” or “SELECT All
Clear.”
MENU
»
MEMORY
You can edit Memory channel contents on the
MEMORY screen.
1. Select the operating band (MAIN or SUB).
2. Push
V/M
to select the VFO mode.
3. Set the frequency and operating mode, and then
push
MPAD
for 1 second.
• A beep sounds.
L When you save up to the set number of Memo Pads
in “Memo Pad Quantity,” the oldest Memo Pad is
automatically cleared for the new Memo Pad.
NOTE: Each Memo Pad must have its own unique contents.
The Memo Pads with identical content cannot be saved.
There are 5 Memo Pads as the default to save
frequencies and operating modes for easy writing
and recall. You can increase the Memo Pads to 10 in
“Memopad Numbers.”
MENU
»
SET > Function > Memo Pad Quantity
L The Memo Pads are separate from memory channels.
D Saving the contents into a Memo Pad
Memo Pads are convenient when you want to
temporarily memorize a frequency and operating
mode, such as when you nd a DX station in a pile-up,
or when the desired station is busy for a long time and
you want to temporarily search for other stations.
D Calling up the Memo Pads
You can call up the saved Memo Pads.
1. Select the operating band (MAIN or SUB).
2. Push
MPAD
several times until the desired Pad is
displayed.
L Pushing
MPAD
selects the Memo Pads.
L The calling up starts with the most recently saved
Pad.
About the MEMO PAD screen
The MEMO PAD screen displays the saved contents in a
list, in which you can select or delete the saved contents.
MENU
»
MPAD
TIP: If you change the frequency or operating
mode called up from Memo Pads, the contents are
automatically updated in a temporary Pad.
Temporary Pad
Key Action
▲/▼
Scrolls through the list.
DEL
Touch 1 second
Deletes the selected Memo Pad.
DEL ALL
Touch 1 second
Deletes all the Memo Pads.
EXPAND
Select to display the MEMO PAD list in a normal
or larger size screen.