Icom IC-9700 Advanced Manual

1-9
1. ADVANCED OPERATIONS
D RTTY Decode Log set
This mode is for the log le type, time stamp setting,
and other RTTY settings.
1. Display the RTTY DECODE SET screen.
MENU
» DECODE > <1> > LOG > Log Set
2. Select an item to set. (Example: File Type)
3. Select a setting option. (Example: HTML)
4. To exit the RTTY DECODE LOG SET screen,
push
EXIT
several times.
TIP: How to reset to the default setting
Touching the item or its option for 1 second displays the
Quick menu, and then touch “Default” to reset to the
default setting.
Operating RTTY (FSK)
File Type (Default: Text)
Select the le type to save a log onto an SD card to
Text or HTML.
L You cannot change the le type while logging.
Time Stamp (Default: ON)
Select whether or not to add the time stamp (date,
transmission time and reception time) in the log.
• ON: Adds the time stamp in the log
• OFF: Does not add the time stamp
Time Stamp (Time) (Default: Local)
Select whether to save the log with the local time or
with the UTC time.
Time Stamp (Frequency) (Default: ON)
Select whether or not to add the frequency in the log.
• ON: Adds the frequency
• OFF: Does not add the frequency

Icom IC-9700 Specifications

General

Receiver Type	Triple conversion superheterodyne
Display	4.3 inch color TFT touch screen
Type	VHF/UHF/1.2GHz All Mode Transceiver
Receiver System	Triple conversion superheterodyne
D-STAR	Yes
Antenna Impedance	50 ohms
Power Supply	13.8V DC ±15%
Frequency Range	144-146 MHz, 430-440 MHz, 1240-1300 MHz
Mode	FM, SSB, CW, AM
Antenna Connector	2m/70cm: SO-239, 23cm: Type-N
Dimensions	240 x 94 x 238 mm
Weight	Approx. 4.7 kg
RF Power Output	2m/70cm: 100W, 23cm: 10W
GPS	Yes (Internal)
Sensitivity	0.18 μV (FM)