9-13
9. D-STAR OPERATION (BASIC)
“FROM” (Access repeater) setting
Set by rotating
:
Select a preset repeater by rotating
on the DR screen.
L You can also select the repeater by rotating
after pushing
.
When you know your access repeater:
From the repeater list:
When your access repeater is in your transceiver’s repeater list, you can
select it by selecting the repeater area and name, if entered, or call sign.
When you do not know which repeater you can access:
Search for a repeater using the DR scan:
The Normal DR scan searches for output repeater frequencies or
simplex signals.
You can also nd FM repeaters.
Search for the nearest repeater:
Searches for the nearest repeater by using your location and the
repeater’s location if it is entered in the Repeater List.
The nearest repeaters in your transceiver’s Repeater List are displayed
as selectable choices.
You can select a nearby repeater type (DV, FM, or DD).
When the “FROM” data is saved in the TX History:
Set from the TX History:
Select a repeater that you have accessed before, from the TX History
record.
To Next Page
Loading...
