Icom IC-9700 - D Entering the GPS Memory Group Name

8-23
8. GPS OPERATION (ADVANCED)
GPS Memory
D Adding a GPS Memory
9. Writing the GPS Memory
1. Touch “<<Add Write>>.”
L If you edit a previously added GPS Memory, touch
“<<Overwrite>>.”
2. Touch [YES].
• The data is added to the GPS memory, and then the
selected GPS Memory group screen is displayed.
3. To close the GPS Memory group screen, push
EXIT
several times.
TIP:
To view the entered content:
Touch the GPS Memory channel. Rotate
MAIN DIAL
to check the whole content.
To cancel the entered data:
While entering or editing the GPS Memory, push
EXIT
to display the conrmation dialog.
Touch [YES] to cancel entering and the display
returns to the GPS Memory group screen.
D Entering the GPS Memory group name
You can enter a name for each GPS Memory group.
1. Open the GPS MEMORY screen.
MENU
» GPS > GPS Memory
2. Touch the group that the name to be entered for
1 second.
3. Touch “Edit Name.”
4. Enter a group name of up to 16 characters.
5. After entering, touch [ENT].
6. To close the GPS MEMORY screen, push
EXIT
several times.