8-22
8. GPS OPERATION (ADVANCED)
GPS Memory
5. Entering the GPS Memory latitude
1. Touch “LATITUDE.”
2. Touch a digit to enter.
3. Enter the latitude.
L Set to between 0°00.00' to 90°00.00'.
L You can change the unit to “ddd°mm'ss".”
» SET > Display > Display Unit >
Latitude/Longitude
4. Repeat steps 2 and 3 to enter the latitude.
D Adding a GPS Memory
6. Entering the GPS Memory longitude
1. Touch “LONGITUDE.”
2. Touch a digit to enter.
3. Enter the longitude.
L Set to between 0°00.00' to 180°00.00'.
L You can change the unit to “ddd°mm'ss".”
» SET > Display > Display Unit >
Latitude/Longitude
4. Repeat steps 2 and 3 to enter the longitude.
5. Touch [N/S] to set to a north latitude (N) or a
south latitude (S).
6. After entering, touch [ENT].
5. Touch [E/W] to set to an east longitude (E) or a
west longitude (W).
6. After entering, touch [ENT].
8. Selecting a GPS Memory group
1. To uc h “G R O U P.”
2. Touch the group between (No Group) and A ~ Z.
L You can save up to 300 Memories in each group.
7. Entering the GPS Memory altitude
1. Touch “ALTITUDE.”
2. Touch [+/-] to set to plus or minus.
3. Enter the altitude.
L Set to between –32808 and +32808 feet.
4. After entering, touch [ENT].
To Next Page
Loading...
