Icom IC-9700 - SCAN Screen

5-2
5. SCANS
SCAN screen
To display the SCAN screen, push
MENU
, and then
touch [SCAN].
Key Action
PROG
Touch
Starts or cancels the Programmed
scan.
Touch
1 second
Displays the SCAN SELECT
screen.
MEMO
Touch Starts or cancels the Memory scan.
Touch
1 second
Displays the SCAN SELECT
screen.
∂F Starts or cancels the ∂F scan
FINE
While Programmed scanning, touch to switch
to the Fine Programmed scan.
While ∂F scanning, touch to switch to the
Fine ∂F scan.
L In the Memory mode, this key is displayed
when a ∂F scan is started.
SELECT
Touch
Selects a Memory channel (except
1A/1B ~ 3A/3B, C1 and C2) to set
as a Select Memory channel.
“1,” “2,” “3,” and “(no icon)”
are alternately displayed.
Touch
1 second
Displays the SELECT ALL CLEAR
screen.
SEL No.
Selects the Select scan number for the Select
Memory scan.
Each time you touch [SEL No.], “1,” “2,”
“3,” and “1,2,3” are alternately displayed.
∂F SPAN
Touch to select the ∂F span between
±5.0 kHz, ±10 kHz, ±20 kHz, ±50 kHz,
±100 kHz, ±500 kHz, and ±1 MHz.
SET Displays the SCAN SET screen.
VFO mode
Push
V/M
.
Memory mode