Icom IC-9700 Advanced Manual

1-7
1. ADVANCED OPERATIONS
D Editing an RTTY memory
You can edit the characters in the RTTY memories.
You can save and transmit 8 RTTY memories (RT1 ~
RT8) for often-used RTTY messages.
Each RTTY memory can contain up to 70 characters.
1. Display the RTTY MEMORY editing screen.
3. Touch [EDIT ].
5. Enter the new characters, and then touch [ENT]
to save.
6. To exit the RTTY DECODE screen, push
EXIT
several times.
2. Touch the memory to edit the content.
(Example: RT2)
MENU
» DECODE > TX MEM > EDIT
Operating RTTY (FSK)
4. To clear a character, touch [←] or [→] to move the
cursor, then touch [CLR].

Icom IC-9700 Specifications

General

Receiver Type	Triple conversion superheterodyne
Display	4.3 inch color TFT touch screen
Type	VHF/UHF/1.2GHz All Mode Transceiver
Receiver System	Triple conversion superheterodyne
D-STAR	Yes
Antenna Impedance	50 ohms
Power Supply	13.8V DC ±15%
Frequency Range	144-146 MHz, 430-440 MHz, 1240-1300 MHz
Mode	FM, SSB, CW, AM
Antenna Connector	2m/70cm: SO-239, 23cm: Type-N
Dimensions	240 x 94 x 238 mm
Weight	Approx. 4.7 kg
RF Power Output	2m/70cm: 100W, 23cm: 10W
GPS	Yes (Internal)
Sensitivity	0.18 μV (FM)