Icom IC-9700 - 13. Updating the Firmware; General; D about Updating the Firmware; D Checking the Firmware Version

13. UPDATING THE FIRMWARE
13-1
General
D About updating the rmware
You can update the IC-9700’s rmware using an SD
card. Updating the rmware adds new functions and/
or improves performance parameters.
You can download the latest rmware from the Icom
website.
http://www.icom.co.jp/world/
TIP: You can also check the rmware version on
the INFORMATION screen.
MENU
» SET > Others > Information > Version
D Checking the rmware version
Check the rmware version when you turn ON the
transceiver.
IMPORTANT: To update the rmware, rst format
your SD card using the IC-9700. Then copy the
downloaded rmware data from your PC into the IC-
9700 folder on the card.
The rmware version is displayed