Icom IC-9700 - D Linking to a Reflector

10-12
10. D-STAR OPERATION (ADVANCED)
Connecting to a reector
Using TX History
TX History saves up to 5 reectors that your Access
repeater linked to before.
Example: Select the “REF010BL” in TX History.
1.
Touch “TO” to select, then open the TO SELECT screen.
2. Touch “Reflector.”
3. Touch “Link to Reector.”
4. Touch the reector that you want to link to.
• Returns to the DR screen, and “Link to Reector” and
“REF010BL” are set in “TO.”
5. Push
TRANSMIT
, or hold down the microphone’s
[PTT] to link to the reflector.
D Linking to a reector
If your repeater is not currently linked to a Reector, or
if you want to change it to another Reector, follow the
steps below. Before linking to another Reector, BE
SURE to unlink the current Reector. (p. 10-13)
Direct inputting a Reector
Example: Directly enter “REF010BL.”
1.
Touch “TO” to select, then open the TO SELECT screen.
2. Touch “Reflector.”
3. Touch “Link to Reector.”
4. Touch “Direct Input.”
5. Touch the number item, then rotate
MAIN DIAL
to
select the reector number and module letter, then
touch [SET].
• Returns to the DR screen, and “Link to Reector” and
“REF010BL” are set in “TO.”
6. Push
TRANSMIT
, or hold down the microphone’s
[PTT] to link to the Reflector.