EasyManuals Logo

Icom IC-9700 Advanced Manual

Icom IC-9700
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
12-6
12. DD MODE OPERATIONS
Troubleshooting for the DD mode operation
See also the TROUBLESHOOTING section in the BASIC MANUAL.
PROBLEM POSSIBLE CAUSE SOLUTION REFERENCE
Unable to transmit or
receiving
LAN cable is not connected or
defective.
Check the LAN cable connection.
Replace the LAN cable.
p. 12-2
[TX INHIBIT] is “ON.”
Push
TRANSMIT
to turn OFF [TX
INHIBIT].
Unable to share les PC setting is not correct. Check workgroup and folder sharing
settings.
Unable to connect to the
internet
IP address setting not correct. Set the correct IP address. p. 12-1

Table of Contents

Other manuals for Icom IC-9700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-9700 and is the answer not in the manual?

Icom IC-9700 Specifications

General IconGeneral
Receiver TypeTriple conversion superheterodyne
Display4.3 inch color TFT touch screen
TypeVHF/UHF/1.2GHz All Mode Transceiver
Receiver SystemTriple conversion superheterodyne
D-STARYes
Antenna Impedance50 ohms
Power Supply13.8V DC ±15%
Frequency Range144-146 MHz, 430-440 MHz, 1240-1300 MHz
ModeFM, SSB, CW, AM
Antenna Connector2m/70cm: SO-239, 23cm: Type-N
Dimensions240 x 94 x 238 mm
WeightApprox. 4.7 kg
RF Power Output2m/70cm: 100W, 23cm: 10W
GPSYes (Internal)
Sensitivity0.18 μV (FM)

Related product manuals