Icom IC-9700 - D Using Your Transceivers Repeater List

10-2
10. D-STAR OPERATION (ADVANCED)
D Using your transceiver’s repeater list
When your access repeater is in your transceiver’s
repeater list, you can select it from the list. By just
selecting the repeater from the list, the repeater call
sign, its frequency, duplex setting, and frequency
offset are automatically set, for easy operation.
Example: Selecting the “Kirkland (IA)” repeater in
Washington, USA from the repeater list.
1. Select the operating band. (Example: 430 MHz)
2. Hold down
CALL
DR
for 1 second to display the DR
screen.
3. Touch [FROM] to select “FROM.”
4. Touch [FROM].
5. Touch “Repeater List.”
6. Select the repeater group where your access
repeater is listed.
7. Select your access repeater.
• Returns to the DR screen, and the selected repeater
name, frequency, and call sign are displayed in
“FROM.”
L The repeater list, described in this manual, may differ
from your transceiver’s preloaded contents.
TIP:
When you select an FM repeater:
When an FM repeater is in your transceiver’s
repeater list, you can select it from the list.
When selecting an FM repeater, the “TO” setting is
not necessary and a “---” is displayed in “TO.”
When selecting an FM repeater.
How to change the repeater group:
To change the repeater group on the DR screen,
push
QUICK
, then select “Group Select.”
“FROM” (Access repeater) setting