4
2
PANEL DESCRIPTION
Speaker
Keypad
Internal microphone
Function display
q
y
u
t
r
w
e
i
o
!1
!0
u VOLUME CONTROL KEY []/[]
± Adjust audio volume level. (p. 16)
±
[] enters or sends the DTMF code ‘D.’ (pgs. 143–145)
The function of tuning control and volume control can be
traded. See page 20 for details.
i CONTROL DIAL [DIAL]
± Rotate to tune the operating frequency. (p. 22)
± During memory mode, rotate to select the memory
channel. (pgs. 18, 92)
± While scanning, changes the scanning direction.
(pgs. 53, 104, 106, 107)
± While pushing and holding [SQL], sets the squelch
level. (p. 17)
± After pushing [BAND] during memory mode operation,
selects the programmed bank. (p. 96)
± During menu screen operation, rotate to select the set
items or values. (p. 115)
The function of tuning control and volume control can be
traded. See page 20 for details.
o EXTERNAL SPEAKER/MICROPHONE JACK [SP/MIC]
Connect a cloning cable, optional speaker microphone or
headset, if desired.
See page 163 for a list of available options.
Be sure to turn power OFF before connecting/disconnect-
ing optional equipment to/from the [SP/MIC] jack.
To Next Page
Loading...
Need help?
General
