123
12
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D Program scan link function (P-LINK)
Sets the program scan link function. The link function pro-
vides continuous program scan in the selected program scan
number during program scan.
Default settings for P-LINK
P0 to P-LINK P9: PROG 1 to
PROG 24 are linked and PROG 0 is no-linked.
• Confirming program scan link
q Push [](2) or [](8) to select the program scan link
number that you want to confirm.
w Push [ ](5) to enter the program scan link setting.
e Push [](2) or [](8) several times to select “LINK.”
r Push [ ](5), then push [](2) or [](8) to confirm the
linked program scans
.
Push [ ](5)
to exit.
• Program scan link setting
q Push [](2) or [](8) to select the program scan link
number that you want to change.
w Push [ ](5) to enter the program scan link setting.
e Push [](2) or [](8) several times to select the setting
“ADD” or “CLEAR.”
• When “ADD” is selected, only non-linked program scans are
displayed. When “CLEAR” is selected, only linked program
scans are displayed.
r Push [ ](5), then push [](2) or [](8) to select the
desired program scan
.
t Push [ ](5)
to set the program scan link setting.
y Repeat steps r and t to add or clear the program
scan to/from the link, or push
[MENU ] to exit MENU
screen operation.
To Next Page
Loading...
Need help?
General
