IDEC SmartRelay FL1D Series User Manual

Programming IDEC SmartRelay
97
IDEC SmartRelay Manual
IDEC SmartRelay shows the following display:
>On
Off
S/W Time:
Off
The current setting of automatic S/W Time conversion is
shown in the bottom row. The default setting is ‘Off’: dis
-
abled.
To enable/disable automatic S/W Time conversion in parameter
assignment mode:
If you want to enable/disable automatic S/W Time conver-
sion in parameter assignment mode, select in the parameter
assignment menu ‘Set..’, then menus ‘Clock’ and ‘S/W
Time’. You can now enable/disable automatic S/W Time
conversion.
Enabling summertime/wintertime conversion
You now want to enable this conversion and define or set its
parameters:
1. Move the ‘>’ cursor to ‘On’: Press ▲ or ▼
2. Confirm ‘On’: Press OK
The display shows:
>EU
3. Select the desired conversion: Press ▲ or ▼
What is shown on the display?:
•‘EU’ represents the start and end of European summer-
time.
•‘UK’ represents the start and end of summertime in the
United Kingdom.
•‘US’ represents the start and end of summertime in the
United States.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

IDEC SmartRelay FL1D Series Specifications

General

Brand	IDEC
Model	SmartRelay FL1D Series
Category	Control Unit
Language	English