Programming IDEC SmartRelay
IDEC SmartRelay Manual 98
•‘AUS’ represents the start and end of Australian summer-
time.
•‘AUS-TAS’ represents the start and end of Australian/
Tasmanian summertime.
•‘NZ’ represents the start and end of New Zealand sum-
mertime.
• . . : Here you can enter any month, day and time zone dif-
ference.
The preset conversion data for EU, UK and US is found in
the table below:
EU Last Sunday in March:
02:00-->03:00
Last Sunday in October:
03:00-->02:00
60 Min.
UK Last Sunday in March:
01:00-->02:00
Last Sunday in October:
02:00-->01:00
60 Min.
US First Sunday in April:
02:00-->03:00
Last Sunday in October:
02:00-->01:00
60 Min.
AUS Last Sunday in October:
02:00-->03:00
Last Sunday in March:
03:00-->02:00
60 Min.
AUS-
TAS
First Sunday in October:
02:00-->03:00
Last Sunday in March:
03:00-->02:00
60 Min.
NZ First Sunday in October:
02:00-->03:00
Third Sunday in March:
03:00-->02:00
60 Min.
.. Customizing the month and
the day: 02:00--> 02:00 +
Time zone difference
Customizing the month and
the day: 03:00--> 03:00 -
Time zone difference
User-defined
(resolution in min
-
utes)
Note
You can specify a time zone difference ∆ between 0 and 180 min-
utes.
Let us assume you want to enable European summertime/
wintertime conversion:
4. Move the ‘>’ cursor to ‘EU’: Press ▲ or ▼
5. Confirm ‘EU’: Press OK
Start of summertime End of summertime Time zone differ-
ence
∆
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To Next Page
Loading...