IDEC SmartRelay FL1D Series - Page 316

Technical data
IDEC SmartRelay Manual 306
Incandescent lamp load
(25000 switching cycles) at
1000 W 1000 W
Fluorescent tubes with ballast
(25000 switching cycles)
10 x 58 W 10 x 58 W
Fluorescent tubes,
conventionally compensated
(25000 switching cycles)
1 x 58 W 1 x 58 W
Fluorescent tubes, uncom-
pensated
(25000 switching cycles)
10 x 58 W 10 x 58 W
Short circuit–proof and
overload–proof
Short–circuit current limitation
Derating none; across the en-
tire temperature
range
none; across the en-
tire temperature
range
Short circuit–proof cos 1 Power protection
B16
600A
Power protection
B16
600A
Short–circuit proof cos 0.5 to
0.7
Power protection
B16
900A
Power protection
B16
900A
Parallel output circuits for
power increase
Not permitted Not permitted
Protection of output relay
(if desired)
max. 16 A,
characteristic B16
max. 16 A,
characteristic B16
Minimum Switching Load 10 mA, 12 V DC 10 mA, 12 V DC
Initial Contact Resistance 100 m
Ωmaximum
(at 1A, 24V DC)
100 mΩ maximum
(at 1A, 24V DC)
Mechanical Life 10,000,000
operations minimum
(no load, 10 Hz)
10,000,000
operations minimum
(no load, 10 Hz)
Electrical Life 100,000 operations
minimum (rated re-
sistive load, 1800
operations / hour)
100,000 operations
minimum (rated re-
sistive load, 1800
operations / hour)
FL1D-H12RCE
FL1D-B12RCE
FL1B-M08B2R2
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com