idp SMART-81 - Page 100

100
Raise the retransfer temperature to use CardPrinterConfig.
(8) Not aligned color print.
 Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80
card (54mm x 86mm).
 The transfer roller or printing roller is
contaminated with the dust and dirt.
Clean the rollers with the cleaning kit.
 Worn-out printer.
Please contact the local supplier.
(9) Unplanned color print.
 Film is not aligned
Check the film cartridge’s algin
 The transfer roller or printing roller is
contaminated with the dust and dirt
Clean the rollers with the cleaning kit
 Worn-out printer.
Please contact the local supplier.
Figure 105
Printing quality trouble
9
Figure 106
Printing quality trouble
10