idp SMART-81 - Page 21

21
xxxxxxxxxxxxxxx+ Retry x x Cancel and
Initialization
Initial error
after close
case
Fail to search Ribbon, or
fail card out while
initialization after Case
Closed. (Refer to Printer
LCD Error Table)
‘+’ is displayed at the end
of first line if there are
more than two errors
Open Front Cov
Card Out Error Retry x x Cancel and
Initialization
Card out fail
after printing
error
Card out fail after
printing error. Left button
is Retry, Right is Cancel
<Retry Cancel>
Front Cov Open Cover
Open
Menu
Card
transfer to
left
Card
transfer to
right
Front Flip Cover open Front Cover open.
KEY0 : Cover Open Menu,
KEY1 : Transfer card to
left
KEY2 : Transfer card to
right, KEY4 : Flipper Flip
Menu <- -> Flip
Flip Cov Open Cover
Open
Menu
Card
transfer to
left
Card
transfer to
right
Flipper Flip Cover open Flipper Cover open
Flipper Cover must be
close to release, and it is
not displayed when the
Flipper Cover Open
Ignore mode
KEY0 : Cover Open Menu,
KEY1 : Transfer card to
left, KEY2 : Transfer for
card to right KEY4 :
Flipper Flip
Menu <- -> Flip
Lami. Cov Open Cover
Open
Menu
Card
transfer to
left
Card
transfer to
right
Flipper Flip Cover open Laminator Cover open
Laminator Cover must be
close to release, and it is
not displayed when the
Laminator Cover Open
Ignore mode and not
applicable during printing
KEY0 : Cover Open Menu,
KEY1 : Transfer card to
left, KEY2 : Transfer for
card to right KEY4 :
Flipper Flip
Close Cover
Hopper Cov Open x x x x Cover open Hopper Cover open
Hopper Cover must be
close to release, and it is
not displayed when the
Hopper cover Open
Ignore mode. and not
applicable during printing
open. And not displayed
Cartridge Open Ignore
Setting also.
Close Cover
Hop Card Empty x x x x Non card in Card empty in Hopper.