idp SMART-81 - Page 98

98
(3) The print image is not partially transferred to the card. (Card area)
 The card surface is uneven or contaminated
with the dust and dirt.
After checking the card, change it to another card.
 Retransfer temperature setting doesn’t match
the card.
Raise the retransfer temperature to use
CardPrinterConfig.
 The printer head is contaminated with the
dust and dirt.
Clean the printer head with cleaning kit.
(4) The print image is not partially transferred to the card. (Front end of
card)
 The card surface is uneven or contaminated
with the dust and dirt.
After checking the card, change it to another
card.
 Retransfer temperature setting doesn’t
match the card.
Raise the retransfer temperature to use
CardPrinterConfig.
 Retransfer start condition setting doesn’t match the card.
Change Retransfer start condition setting to use CardPrinterConfig.
 Retransfer start position setting doesn’t match the card.
Change Retransfer start position setting to use CardPrinterConfig.
Figure 100 Printing quality trouble 4
Figure 101 Printing quality trouble 5