Image Access widetek 44 User Manual

/ /
Page 108 Manual
E The Setup Level
The setup level is divided in three access levels. The access levels Poweruser and
Admin are password protected.
The User access level allows showing certain information about the system like power up
time, remaining lamp life time or firmware version.
Furthermore the access level User allows setting some basic parameters.
Start your browser and enter the IP address of the scanner to get access to the scanner.
The Scan2Net® main menu will open (see Picture 114).
The Login Screen
On the main menu click the button Setup Device .
The next screen shows the login levels User , Poweruser and Admin .
Picture 120: Login screen
Please note: The login levels Poweruser and Admin are password protected.
Only trained technicians should use these levels.

Image Access widetek 44 Specifications

General

Brand	Image Access
Model	widetek 44
Category	Scanner
Language	English