/ /
Page 98 Manual
C.7.2 USB Options
An USB connector is available at the front of the scanner to connect suitable USB data
carriers, for example USB sticks.
Touching USB Options displays the directory of a connected USB data carrier.
Picture 107: Directory of connected USB data carrier
While the directory of the USB data carrier is displayed, the LED indicator of the connector
is continuously illuminated.
Touch Ok or Cancel to stop displaying the directory of the USB stick.
When data is transferred between the USB data carrier and the scanner the LED indicator
blinks.
Note: When the blue indicator LED stops blinking, data transfer may still be in
progress. Before unplugging the USB media, wait a few seconds to avoid loss of
data.
C.7.2.1 List of suitable USB storage media
The criteria in the following list have been defined as a guide line for the storage media
that can be connected to the USB connectors.
• USB memory sticks,
• USB hard disks,
• USB hard disks without partition, with one or with multiple partitions,
formatted with the file systems UDF, FAT, FAT16, VFAT, FAT32, NTFS, EXT2, EXT3
or ReiserFS
The file system EXT4, BTRFS, UFS, ZFS or exFAT currently will not be supported.
To Next Page
Loading...
Need help?
General
