Inficon Transpector MPH User Manual

2 - 7
Transpector MPH Operating Manual
2.3.1.2 Changing the Computer IP Address
An alternative to changing the Transpector MPH IP address is to change the host
computer’s IP address to allow for communication between the host computer and
Transpector MPH. To change the computer’s IP address, follow these instructions:
2.3.1.2.1 Windows 7 Instructions
NOTE: Changing the IP address of the host computer requires administrator
rights. You will need to use an administrator account to change the
IP address.
1 Click Start to display the Start menu, then click Control Panel. Start is located
on the taskbar on the Windows 7 desktop. See Figure 2-4.
Figure 2-4 Start menu
2 In the Network and Internet group. click View network status and tasks.
See Figure 2-5.
Figure 2-5 View network status and tasks

Inficon Transpector MPH Specifications

General

Brand	Inficon
Model	Transpector MPH
Category	Measuring Instruments
Language	English