Programming manual
Default programming 101
Keys
• belong to partition 1
• Maintenance option enabled
Telephone
• numbers 1 to 6 in the contacts list have the voice attribute (user)
• numbers 7 and 8 in the contacts list are for alarm receiving centres CONTACT-ID
• number 9 in the contacts list has the voice attribute (for the installer)
Zone alarm/tamper events
• relay output activated
• “Other outputs / Sounder/flasher 1” activated
• on activation of the event, calls contact numbers 1 to 8
• on restoral of the event, calls contact numbers 7 to 8
Zone bypass events
• calls to contact numbers 7 and 8
Partition Arming/Disarming events
• calls to contact numbers 7 and 8
Partition Arming/Disarming events
• calls to contact numbers 7 and 8
Emergency button (Panic) events
• on activation of the event, calls contact numbers 1 to 8
Open-panel/Panel dislodgement events and tamper on peripheral
events
• relay output activated
• “Other outputs / Sounder/flasher 1” activated
• on activation of the event, calls contact numbers 1 to 8
• on restoral of the event, calls contact numbers 7 to 8
Blown fuse, A.C. mains failure, peripheral loss and low battery
events
•activated Output 1
• calls to contact number 9 (voice call to installer)
Sounders/Flashers
• causes shutdown on the sounder and the flasher: Reset memories on partition (Partition 1)
To Next Page
Loading...
