Programming manual
About this manual 7
About this manual
MANUAL CODE
DCMPINE0PRIMEE
REVISION
1.50
PROGRAMMING
MANUAL
This Programming manual contains instructions for the configuration and programming of the
Prime system, as well as the descriptions of all the parameters and options, irrespective of the
chosen means of programming (keypad, software, etc.).
It also contains the instructions for commissioning, maintenance and troubleshooting
procedures.
0-1
Terminology
CONTROL PANEL,
SYSTEM, DEVICE
Refers to the main control panel or any device that belongs to the Prime security system.
LEFT, RIGHT,
BEHIND, ABOVE,
BELOW
Refer to the directions as perceived by the operator when directly in front of the mounted
device or PC screen.
QUALIFIED
PERSONNEL
Persons whose training, expertise and knowledge of the products and laws regarding security
systems, are able to create, in accordance with the requirements of the purchaser, the most
suitable solution for the protected premises.
SELECT
Click on a specific option on the user interface to select the desired option (drop-down menu,
options boxes, graphic object, etc.).
PRESS
Click on/push a video button/key on a keypad or screen.
0-2
Graphic conventions
Note
The notes contain important information highlighted outside of the text they refer to.
ATTENTION!
The “Attention” warnings indicate that total or partial disregard of the procedures might
damage the device or its peripherals.
To Next Page
Loading...
