Intel Arria 10 FPGA User Manual

Related Information
• Altera Software Installation and Licensing
Comprehensive information for installing and licensing Altera software.
• myAltera Account Sign In web page
2.2. Development Kit Package
1. Download the Arria 10 FPGA Development Kit package zip file available at the Intel
website.
2. Extract the contents of the zip file to your hard drive.
The development kit directory structure is shown in the following figure.
Figure 4. Installed Development Kit Directory Structure
<install dir>
documents
board_design_files
The default Windows installation directory is C:\altera\<version>\.
examples
factory_recovery
demos
kits
<device name>
Table 1. Installed Directory Contents
Directory Name Description of Contents
board_design_files
Contains schematic, layout, assembly, and bill of material board design files.
Use these files as a starting point for a new prototype board design.
demos
Contains demonstration applications when available.
documents
Contains the documentation.
examples
Contains the sample design files for this kit.
factory_recovery
Contains the original data programmed onto the board before shipment. Use
this data to restore the board with its original factory contents.
Related Information
Link to download zip file for the Arria 10 Development Kit Package
2.3. Installing the USB-Blaster Driver
The development board includes integrated USB-Blaster circuitry for FPGA
programming. However, for the host computer and board to communicate, you must
install the On-Board USB-Blaster II driver on the host computer.
2. Getting Started
683526 | 2023.07.12
Send Feedback
Intel
®
Arria
®
10 FPGA Development Kit User Guide
9

Intel Arria 10 FPGA Specifications

General

Brand	Intel
Model	Arria 10 FPGA
Category	Microcontrollers
Language	English